Network > Wireless. This page lists the Wi-Fi configuration section of the physical radio. You can configure the Wi-Fi hotspot and the Wi-Fi relay.radio0 is corresponding to the wireless modem on the router SSID | Mode: Master is the primary Wi-Fi hotspot SSID | Mode: Client is the Wi-Fi relay network Associated stations indicate the active Wi-Fi networks and its working statusEdit button on the second row of SSID | Mode: Master to enter the configure section of the primary Wi-Fi hotspot.Device Configuration, in the tab General Setup, you can monitor the network Status and configure Wi-Fi operating Mode, Channel, Width, and Transmit Power.Wi-Fi Mode | Channel | Width on master Wi-Fi hotspot will be locked to use the same Wi-Fi settings on connected Wi-Fi relay network after enabled the Wi-Fi relay function.Device Configuration, in the tab of Advanced Settings, go to Country Code field, and select the correct country code. It is essential to ensure the Wi-Fi hotspot on your router meets the legal regulations in your country. The other configured Wi-Fi networks will use the same device settings.Interface Configuration, in the tab General Setup, you can edit the name of Wi-Fi hotspot on the field ESSID.Wireless Security to enter the encryption section and configure the Wi-Fi password.Encryption: Select an encryption method. e.g., WPA2-PSK is recommended for home and small office networks.Cipher: The Auto is recommended.Key is the Wi-Fi password, which is a secret phrase that clients must use to connect to your Wi-Fi network. With WPA2-PSK encryption, the Key must be at least eight characters.Hide ESSID, and the router will stop broadcast the Wi-Fi hotspot but remain the Wi-Fi connection when entering the Wi-Fi hotspot name and password manually.WMM, Wi-Fi Multimedia, is an automated way of handling Quality of Service (QoS) on the Wi-Fi network that provides improved video and voice performance over the wireless network.LAN interface on the EZR23 router must set in a different subnet than the Wi-Fi hotspot you are connecting. 192.168.20.1, and the Wi-Fi hotspot we are connecting to is using 192.168.1.x addresses.Network> Wireless, the Wireless Overview page.Scan button on the first row of radio0. The router starts scans the nearby 2.4GHz Wi-Fi hotspots. Join Network.Name of the new network as wwan, and select wan firewall zone. Submit button on the bottom right corner to enter the Wi-Fi client configure page, set other things as needed. The most important settings are on the row of Operating Frequency.Save & Apply button on the bottom right corner to apply the new configurations.Replace wireless configuration unless you intend to disable the Wi-Fi master hotspot on the router.Name of the new network.